LSI 3ware 9750 User Manual page 115

www.lsi.com/channel/products
The page refreshes, and a message at the top confirms the change you
have made.
If your system has no BBU, a message will caution you about enabling
write cache.
To enable or disable unit write cache through 3BM
1 At the main 3BM screen, select the unit by highlighting it and pressing
Enter.
An asterisk appears in the left-most column to indicate that it is selected.
2 to the
Tab Maintain Unit
3 On the pop-up menu, select
4 In the Configure Disk Array screen,
.
Settings
Figure 59. Unit Write Cache State in 3BM
The current setting—Enabled or Disabled—is shown. (The initial default
setting is for write cache to be enabled.)
5 Press to display the choices, use the
Enter
setting you want, and press
6 Tab to the OK button and press
You return to the main 3BM screen.
7 When you are finished making changes, press
3BM.
button and press .
Enter
and press
Configure
to the field
Tab
arrow keys
again to choose it.
Enter
Enter to select it.
F8
Setting Unit Policies
.
Enter
Write Cache
to select the
to save them and exit
103