Midi Pc Out - Roland V-Bass VB-99 Owner's Manual

Chapter 5 Using MIDI

MIDI PC OUT

This setting determines whether or not Program Change messages
are output when the VB-99's patches are switched.
1.
Follow Steps 1–3 in "Setting the MIDI-Related
Functions" (p. 52) to display the MIDI screen.
2.
Press PAGE [ ] [
3.
Set PC OUT ON/OFF with [F1] or the F1 knob.
When outputting Program Change messages, the VB-99
simultaneously outputs MIDI Bank Select messages.
54
] to display Page 5.
TX PC MAP (TRANSMIT PROGRAM
CHANGE MAP)
This setting determines the sequence of Program Change messages
output when the VB-99's patches are changed.
You can select whether to output Program Change messages set for
the patches in advance or the Program Change messages
programmed in each patch.
1.
Follow Steps 1–3 in "Setting the MIDI-Related
Functions" (p. 52) to display the MIDI screen.
2.
Press PAGE [ ] [
3.
Use [F2] or the F2 knob to set whether or not
the Transmit Program channel is used.
Available Description
Settings
Regardless of the patch settings, Program Change
FIX messages predetermined for each patch number are
output.
The Program Change messages programmed in
PROG
each patch are output.
The table below shows the correspondence between the patches and
Program Change messages when TX PC MAP is set to FIX.
Patch Bank Select Program
Number
001 0
: :
100 0
101 1
: :
200 1
201 2
: :
400 3
] to display Page 5.
Number
1
:
100
1
:
100
1
:
100