Using The Switches, Pedals, And Midi To Control The Sounds (Control Assign) - Roland V-Bass VB-99 Owner's Manual

Using the Switches, Pedals,
and MIDI to Control the
Sounds (CONTROL ASSIGN)
These settings are made when parameters are to be controlled with
the GK-3B VOLUME knob or DOWN/S1, UP/S2 switches, the VB-
99's CONTROL buttons, an external pedal or other connected
controller, or a connected MIDI device.
In addition to settings already assigned to controllers, the VB-99 also
features sixteen prepared general-purpose control assigns that let
you freely assign settings to controllers as you like.
* If you intend to control the parameters of effects and the like, be sure to
set the effect to ON beforehand.
* For more detailed information on the parameters, refer to
"CONTROL ASSIGN" (p. 135),
* Enabling the settings requires setting each of the controller
assignments to ASSIGNABLE in the SYSTEM CONTROL ASSIGN
screen. For detailed information, refer to "Setting the GK VOLUME
Control and Switch and the Pedal Function (SYSTEM
CONTROL ASSIGN)" (p. 42).
1.
Press [CONTROL ASSIGN]
2.
Select the controller you want to set with
PAGE [ ] [ ] and [F1]–[F6].
The various controllers' setting screens appear.
* The following section describes the controllers you can set.
Displayed
screen
GK VOL
GK VOL
S1, S2 GK S1, S2
CTL1 CONTROL1
CTL2
CONTROL2
Controller
Settings for the volume knob on the
GK-3B.
Settings for the switches on the
GK-3B.
Settings for the CONTROL 1 but-
ton on the VB-99's top panel.
Settings for the CONTROL 2 but-
ton on the VB-99's top panel.
Chapter 7 Other Functions
Displayed
screen
D BEAM T-ARM/
PITCH
D BEAM FREEZE
FILTER
D BEAM FILTER
DBM V D BEAM V
DBM H
D BEAM H
Displayed
screen
PITCH
RIBBON T-ARM
FILTER
RIBBON FILTER
RB POS
RIBBON POS
RB ACT RIBBON ACT
Displayed
screen
EXP
EXP PEDAL
CTL3
CTL3
CTL4
CTL4
Controller
Control of TREMOLO ARM/
FREEZE with the D Beam control-
ler
Control of FILTER with the D
Beam controller
D Beam controller vertical sensor
D Beam controller horizontal sen-
sor
Controller
Control of PITCH with the TREM-
OLO ARM.
Control of FILTER with the Ribbon
controller
Ribbon controller position sensor
Ribbon controller touch sensor
Controller
Settings for the expression pedal
connected to the EXP PEDAL jack
on the VB-99's rear panel.
Settings for the footswitch connect-
ed to the CTL3 jack on the VB-99's
rear panel.
Settings for the footswitch connect-
ed to the CTL4 jack on the VB-99's
rear panel.
77