Table of Contents
Advertisement
Chapter 8 Parameter Guide
CATEGORY NAME
Parameter/
Explanation
Range
CATEGORY NAME
This sets the Category name.
INSERT
Insert a space at the cursor location.
DELETE
Delete a character. The characters that fol-
low get shifted to the left.
SPACE
Input a space at the cursor location.
A0!
Switch between uppercase letters, numbers,
and characters.
A<=>a
Switch between uppercase letters and low-
ercase letters.
CATGRY
Select the user category you want to name.
D BEAM CALIB
(D BEAM Calibration)
Parameter/
Explanation
Range
D BEAM DISAB (D BEAM Disable)
You can disable the D BEAM controller for the entire device.
OFF
The D BEAM is enabled.
ON
The D BEAM is disabled.
* Pressing the D BEAM [PITCH], [FILTER],
or [ASSIGNABLE] button to switch the D
BEAM controller on will have no effect.
PATCH EXTENT
Parameter/
Explanation
Range
PATCH EXTENT
You can set upper and lower limits to define the range of patches that
can be switched.
Set the lower limits to define the range of
FROM
patches.
TO
Set the upper limits to define the range of
patches.
156
FACTORY RESET
Parameter/
Explanation
Range
FACTORY RESET
This restores the VB-99 to the settings it had when it was shipped
from the factory.
ALL
All data.
SYSTEM
Content of the settings for the SYSTEM
parameters.
GK SETTING
Content of the settings for GK SETTING.
GLOBAL
GLOBAL function settings.
PATCH
Settings for patch numbers 001–200.
FAVORITE SETTING Content of the settings in FAVORITE
SETTINGS 01–10 for all effects.
SYSTEM
Advertisement
Table of Contents
