Using The Vb-99 To Add Effects To Audio Playback From A Computer - Roland V-Bass VB-99 Owner's Manual

Using the VB-99 to Add
Effects to Audio Playback
from a Computer
In the computer application, set the audio output port to the VB-99.
You can use the VB-99 to apply effects to the audio data played by
the computer, then record the data again with the computer.
Use this process when, for example, you want to add effects to
existing audio data.
* Set the software so audio is not passed through it.
1.
Press [SYSTEM].
2.
Press PAGE [ ] [
3.
Press [F2] (USB).
4.
Press PAGE [ ] to go to Page 1.
5.
Use [F1] or the F1 knob to set the point within
the VB at which you want the connection to be
made.
Here, set either COSM BASS A, COSM BASS B, or NORMAL
PU.
For more information about the USB IN parameter
settings, refer to "Setting the Digital Audio Signal
Input and Output" (p. 66).
6.
Use [F2] or the F2 knob to adjust the level of
the digital audio from the USB (computer).
7.
Press [EXIT] one or more times to return to the
Play screen.
Chapter 6 Using the VB-99 Connected to a Computer Via USB
] to go to Page 2.
69