Chapter 3 Global Device Settings (System); Inputting The Divided Pickup Settings; Selecting The Settings; Naming Gk Settings (Gk Name) - Roland V-Bass VB-99 Owner's Manual

Roland v-bass system owner's manual
Hide thumbs Also See for V-Bass VB-99:
Table of Contents

Advertisement

Chapter 3 Global Device Settings (SYSTEM)

* The parameters described in this section are saved without the Write
procedure being performed.
Inputting the Divided Pickup
Settings
To ensure optimal conditions for producing sounds with the VB-99,
making the correct settings affecting the divided pickup (the GK
settings) is required.
After you have finished inputting the various settings, press [EXIT]
one or more times to return to the Play screen.

Selecting the Settings

The VB-99 can store ten separate sets of GK settings. If you are
playing more than one bass using the VB-99, you can store separate
settings for each one, allowing you to be ready in moments with the
necessary settings when the basses are switched.
1.
Press [SYSTEM].
2.
Press PAGE [
] to display Page 1.
3.
Press [F3] (GK) to display the GK SETTING
screen.
4.
Press PAGE [
] to display Page 1.
5.
Press [F4] (SELECT) or turn the F4 knob to
select the GK setting (1–10).
This specifies the setting to be stored as the GK setting.
* Pressing [EXIT] at this point and returning to the Play screen
enables the selected GK setting.
* When PATCH is selected for the SET MODE parameter, the GK
settings specified in each patch take priority. For detailed
information, refer to "Using Different Bass Settings in Each
Patch (SET MODE)" (p. 39).

Naming GK Settings (GK NAME)

You can give names to each of the GK settings.
1.
Follow Steps 1–5 in "Selecting the Settings"
(p. 35) to select the GK SETTING.
2.
Press PAGE [
] to display Page 1.
3.
Press [F6] (NAME).
4.
Set the name using PAGE [
and the PATCH/VALUE dial.
Function Button
Explanation
[F1] (INSERT)
Insert a space at the cursor location.
Delete a character. The characters that
[F2] (DELETE)
follow get shifted to the left.
[F3] (SPACE)
Input a space at the cursor location.
Switch between uppercase letters and
[F4] (A0!)
lowercase letters.
Switch between uppercase letters, low-
[F5] (A<=>a)
ercase letters, numbers, and characters.
* Press [EXIT] one or more times to return to the previous screen.
] [
], [F1]–[F5],
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-bass 04672434

Table of Contents