Matching The Divided Pickup And Normal Pickup Phase (Gk Pu Phase); Setting The Direction For The Installed Divided Pickup (Gk Pu Direction); Setting The Down/S1, Up/S2 Switch Arrangement (S1, S2 Pos) - Roland V-Bass VB-99 Owner's Manual

Matching the Divided Pickup
and Normal Pickup Phase
(GK PU PHASE)
Certain peculiarities in the sound may appear when the COSM bass
and normal pickup sounds are mixed. If this occurs, adjust this
parameter and switch the COSM bass's phase.
1.
Follow Steps 1–5 in "Selecting the Settings"
(p. 35) to select the GK SETTING.
2.
Press PAGE [ ] [
3.
Use [F1] (SELECT) or the F1 knob to select the
phase.
Settings Explanation
NORMAL Leave the phase unchanged.
REVRSE Invert the phase.
Setting the Direction for the
Installed Divided Pickup
(GK PU DIRECTION)
* Make this setting if the divided pickup has been installed with the Hi
C string end and Low B string end reversed.
1.
Follow Steps 1–5 in "Selecting the Settings"
(p. 35) to select the GK SETTING.
2.
Press PAGE [ ] [
3.
Use [F2] (SELECT) or the F2 knob to select the
pickup direction.
Settings Explanation
The cable exits the pickup in the direction of the
NORMAL
bass's bridge.
The cable exits the pickup in the direction of the
REVRSE
bass's neck.
NORMAL
string Hi C
string 1
string 2
string 3
string 4
string Low B
] to display Page 3.
] to display Page 3.
REVERSE
Chapter 3 Global Device Settings (SYSTEM)
Setting the DOWN/S1, UP/S2
Switch Arrangement (S1, S2 POS)
On some basses with the divided pickup built in, the positions of the
DOWN/S1 and UP/S2 switches are reversed. Set this so that the
functions match.
1.
Follow Steps 1–5 in "Selecting the Settings"
(p. 35) to select the GK SETTING.
2.
Press PAGE [
3.
Use [F3] (SELECT) or the F3 knob to select the
arrangement.
Settings Explanation
NORMAL The switches will not be reversed.
The DOWN/S1 switch and UP/S2 switch will
REVRSE
be reversed.
] [ ] to display Page 3.
37