Switching With The Patch/Value Dial; Turning Off The Power - Roland V-Bass VB-99 Owner's Manual

Switching with the PATCH/
VALUE Dial
You can switch patches consecutively with the PATCH/VALUE
Dial.
1.
Confirm that the Play screen is displayed.
If a screen other than the Play screen is shown, press [EXIT]
several times until the Play screen appears.
2.
Rotate the PATCH/VALUE dial to switch the
patches.
fig.01-190
2
Turn the dial to the right (clockwise) to switch to the next
patch number, or to the left (counterclockwise) to switch to the
previous patch number.
Chapter 1 Outputting Sounds

Turning Off the Power

1.
Confirm the following before turning off the
power.
• Are the volume levels for the VB-99 and connected amp and
other devices turned down completely?
2.
Turn off the power to the bass amp (power
amp).
3.
Press [POWER] to turn off the VB-99's power.
fig.01-190
The message "NOW SHUTDOWN..." appears when
the power is switched off. The VB-99's current
settings are saved to memory at this time. Do not
disconnect the AC adaptor until this message is no
longer displayed.
3
25