Separating Patches Into Groups (Category); Using Category To Call Up Patches; Assigning A Patch To A Category - Roland V-Bass VB-99 Owner's Manual

Separating Patches into
Groups (CATEGORY)
The VB-99 includes a function that allows you to categorize patches
into a number of different groups. This is called the CATEGORY
function. Specifying the category for each patch makes searching for
patches more convenient. The CATEGORY function also features ten
user categories you can name however you like.
Using CATEGORY to Call Up
Patches
1.
Confirm that the Play screen is displayed.
2.
Press [CATEGORY].
The Category screen appears.
The categories and the patches in these categories are shown in
list format.
3.
Use [F1] (SEL ) and [F2] (SEL
and F2 knobs to select the category.
4.
Use the PATCH/VALUE dial or [F3] (SEL
[F4] (SEL ) to select a patch.
5.
Press [CATEGORY] again.
The VB-99 switches to the selected patch.
If no operation if performed within a set period of time,
the display returns to the Play screen.

Assigning a Patch to a Category

You can assign categories to patches and separate them into groups.
1.
From the PLAY screen, use the PATCH/VALUE
dial to select the patch you want to include in a
category.
2.
Press [NAME/KEY/BPM].
3.
Press [F1] (NAME).
The Name settings screen appears.
4.
Press [F6] (CATGRY).
The Category settings popup appears.
) or the F1
),
5.
Use the F6 knob to select the category.
6.
Press [EXIT].
The category is assigned to the patch.
7.
If you want to save the edited settings,
perform the Write procedure (p. 34).
* If you do not want to save, press [EXIT] to return to the Play screen.
Chapter 7 Other Functions
85