Main Menu; Commands; Metering; Measurements - ABB DPA UPScale ST40 User Manual

6.2.2 Main menu

DESCRIPTION
1 Logging control. A log of the last 64 events is
stored in the power management display.
2 In the Measurements menu: monitor voltages,
power, frequencies, currents, autonomy, etc.
3 The Command menu lets the user perform the
commands: load to the inverter, load to bypass,
battery test.
4 The UPS Data are the UPS personalized
information "serial number."
5 Various settings can be made by the user:
date/time, automatic battery test, etc.
6 Various adjustments can be performed by the
service staff.

6.2.3 Commands

DESCRIPTION
1 Transfer load to inverter
2 Transfer load to bypass.
3 Battery test

6.3 Metering

6.3.1 Measurements

DESCRIPTION
1 Battery Runtime
2 UPS-output frequency
3 Bypass frequency.
4 Battery voltage
5 Battery charger current
Modifications reserved
Page 45/79
LCD-DISPLAY
 EVENT LOG
MEASUREMENTS
 MEASUREMENTS
COMMANDS
 COMMANDS
UPS DATA
 UPS DATA
SET-UP USER
 SET-UP USER
SET-UP SERVICE
 SET-UP SERVICE
NO MORE MENU
LCD-DISPLAY
 LOAD TO INVERTER
LOAD TO BYPASS
 LOAD TO BYPASS
PERFORM BATT.TEST
 PERFORM BATT.TEST
NO MORE COMMANDS
LCD-DISPLAY
BATT. RUN TIME (MIN)
00h 00m
OUTPUT FREQUENCY (HZ)
50.00
BYPASS FREQUENCY (HZ)
50.00
BATTERY VOLTAGE (V)
+ 0.0 - 0.0
BATT. CHARGE CUR. (A)
+ 0.0 - 0.0