ABB DPA UPScale ST40 User Manual page 35

NOTE: For UPS-Systems DPA UPScale M-10kW, M-20kW it is permissible to use 40-50 (only
even numbers) of 12V-battery blocks.
For UPS-System UPScale M-20kW use only 48-50 (only even numbers) of 12V-battery blocks.
NOTE: Set-up the correct number of battery blocks on control panel (menu: service-set-up).
Frame: DPA UPScale ST S2 80 or ST 120 frames with Modules M 10 or M 20
CBAT UPScale-120
A
8 5x28Ah 5x28Ah
5x28Ah 5x28Ah
7
6 5x28Ah 5x28Ah
5x28Ah 5x28Ah
5
4 5x28Ah 5x28Ah
5x28Ah 5x28Ah
3
5x28Ah 5x28Ah
2
5x28Ah 5x28Ah
1
Battery Cabinet 120
(3x40)x28Ah
Fig 5.6.1-1: External battery configuration
CBAT UPScale-120
Dimensions (WxHxD)
Weight with trays and w/o batteries
For detailed information on, and layout of, the battery cabinets, please refer to the "external battery
cabinets" chapter of the technical data sheet.
Examples:
On drawing "CBAT UPScale-120" (3x40)x 28 Ah battery blocks are fitted. The lower batch of 40x 24
Ah belong to the UPS 1, the middle batch of 40x 24 Ah belong to the UPS 2 and the top batch of 40x
24 Ah belong to the UPS 3.
On drawing "CBAT UPScale-200" (5x40)x 28 Ah battery blocks are fitted in the battery cabinet and
each UPS module is provided with 40x 28 Ah.
Depending on the configuration requested, the batteries may be connected separately for each
module or paralleled into one common battery for five UPS modules.
Modifications reserved
Page 35/79
B C
5x28Ah
5x28Ah
5x28Ah
5x28Ah
5x28Ah
5x28Ah
5x28Ah
5x28Ah
F1 F2 F3
CBAT UPSCALE-120
mm
kg
CBAT UPScale-200
A B C
5x28Ah 5x28Ah 5x28Ah
7
5x28Ah
5x28Ah 5x28Ah
6
5x28Ah 5x28Ah 5x28Ah
5
5x28Ah 5x28Ah 5x28Ah
4
5x28Ah 5x28Ah 5x28Ah
3
5x28Ah
5x28Ah 5x28Ah
2
1 5x28Ah 5x28Ah 5x28Ah
Battery Cabinet 200
(5x40)x28Ah
Fig 5.6.1-2: External battery configuration
CBAT UPScale-200
730x1975x800
290
D E F
5x28Ah 5x28Ah 5x28Ah
5x28Ah 5x28Ah
5x28Ah
5x28Ah 5x28Ah 5x28Ah
5x28Ah 5x28Ah 5x28Ah
5x28Ah 5x28Ah 5x28Ah
5x28Ah 5x28Ah
5x28Ah 5x28Ah
F1 F2 F3
F4 F5
CBAT UPSCALE-120
1200x1975x800
410