P02
stands for Parallel UPS in a Multi- UPS system and 02 stands for the second UPS
(SLAVE) in the Multi- UPS system.
P03
stands for Parallel UPS in a Multi- UPS system and 03 stands for the third UPS
(SLAVE) in the Multi- UPS system.
The definition of the UPS "Position" in a parallel system is achieved in the Menu Set-Up Service.
DESCRIPTION
Single UPS Systems
Parallel System e.g. first UPS cabinet
Parallel System e.g. second UPS cabinet / Slave
Note: The max no. of UPS units is 6.
6.5.7
Main Menu Screen
DESCRIPTION
1
Logging Control. A log of the last 99 events is stored in
the
Power Management Display.
2
In Menu Measurements: monitor voltages, power,
frequencies, currents, autonomy etc.
3
The Command Menu enables to perform the
commands "Load to inverter", Load to bypass, battery
test.
4
The UPS Data are the UPS personalized information
"serial number"
5
Various settings can be performed by the user:
Date/Time, automatic battery test, etc.
6
Various adjustments can be performed by the service
staff
6.5.8
Event Log Screen
DESCRIPTION
1 Logging Control; a log of the last 99 events is stored in
the Power Management Display.
2 Every stored event is identified with a sequential number
and time stamp.
3
By press ENTER the code of the event will be displayed.
ENTER to come back to the previous indication)
4 All events and alarms are indicated with their date and
time of appearance.
Modifications reserved
Page 54/94
LCD-DISPLAY
SYSTEM
CONFIGURATION
SINGLE
SYSTEM
CONFIGURATION
PARALLEL
LOAD OFF
SUPPLY FAILURE
LCD-DISPLAY
EVENT LOG
MEASUREMENTS
MEASUREMENTS
COMMANDS
COMMANDS
UPS DATA
UPS DATA
SET-UP USER
SET-UP USER
SET-UP SERVICE
SET-UP SERVICE
NO MORE MENU
LCD-DISPLAY
01
05-10-08
LOCAL LOAD OFF
02
05-10-08
LOCAL LOAD TO BYP
03
(Press
LOCAL LOAD TO INV
04
05-10-08
LOCAL LOAD TO INV
S
P01
P02
14:38:59
14:38:56
8104
14:37:14