Table of Contents
Advertisement
On the right hand side of the LCD there is a 3-digit indicator defining the UPS "Position" in the Multi-UPS system.
S
stands for Single UPS. The system consists only of one UPS.
P01
stands for Parallel UPS in a Multi- UPS system and 01 stands for the first UPS (MASTER) in the
parallel UPS system.
P02
stands for Parallel UPS in a Multi- UPS system and 02 stands for the second UPS (SLAVE) in the
Multi- UPS system.
P03
stands for Parallel UPS in a Multi- UPS system and 03 stands for the third UPS (SLAVE) in the
Multi- UPS system.
The definition of the UPS "Position" in a parallel system is achieved in the Menu Set-Up Service.
DESCRIPTION
Single UPS Systems
Parallel System e.g. first UPS cabinet
Parallel System e.g. second UPS cabinet / Slave
Note: The max no. of UPS units is 6.
6.5.7
Main Menu Screen
DESCRIPTION
1
Logging Control. A log of the last 99 events is stored in the
Power Management Display.
2
In Menu Measurements: monitor voltages, power,
frequencies, currents, autonomy etc.
3
The Command Menu enables to perform the commands
"Load to inverter", Load to bypass, battery test.
4
The UPS Data are the UPS personalized information
"serial number"
5
Various settings can be performed by the user: Date/Time,
automatic battery test, etc.
Various adjustments can be performed by the service staff SET-UP SERVICE
6
6.5.8
Event Log Screen
DESCRIPTION
1 Logging Control; a log of the last 99 events is stored in the
Power Management Display.
2 Every stored event is identified with a sequential number
and time stamp.
3
By press ENTER the code of the event will be displayed.
ENTER to come back to the previous indication)
4 All events and alarms are indicated with their date and time
of appearance.
04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx
Modifications reserved
LCD-DISPLAY
SYSTEM CONFIGURATION
SINGLE
SYSTEM CONFIGURATION
PARALLEL
LOAD OFF
SUPPLY FAILURE
LCD-DISPLAY
EVENT LOG
MEASUREMENTS
MEASUREMENTS
COMMANDS
COMMANDS
UPS DATA
UPS DATA
SET-UP USER
SET-UP USER
SET-UP SERVICE
NO MORE MENU
LCD-DISPLAY
01
05-10-08
LOCAL LOAD OFF
02
05-10-08
LOCAL LOAD TO BYP
03
(Press
LOCAL LOAD TO INV
04
05-10-08
LOCAL LOAD TO INV
S
P01
P02
14:38:59
14:38:56
8104
14:37:14
Page 47/78 ABB
Advertisement
Table of Contents
