Internal Battery Modules Dpa Upscale St S2 40; Internal Battery Modules Dpa Upscale St S2 60 - ABB DPA UPScale ST40 User Manual

For DPA UPScale M-20 kW UPS systems, it is permissible to use 30-50 (only even numbers) 12 V
battery blocks depending the power sourced on the output.
(For more information refer to chapter 6 of the technical data sheet).
IMPORTANT:
For maximum battery autonomies with the corresponding output power range and number of battery
blocks per string, refer to the "battery characteristics" chapter in the technical data sheet.
NOTE:
Set up the correct number of battery blocks in the control panel (menu: Service-Set-Up).
DPA UPScale ST S2 60 FRAME
Module
Module
1x(2x40)x7Ah
Fig 5.5.2-1: Internal Battery Modules DPA UPScale ST S2 60
Other combinations are possible - refer to the technical data sheet.
Modifications reserved
Page 33/79
Module
Module
2x(2x40)x7Ah 3x(2x40)x7Ah
Module Module
Module Module
Module Module
3x(1x50)x7Ah