Error Messages - Leica IP C Instructions For Use Manual

Display
code
INK EMTPY flashing
7.3

Error messages

Display
code
Magazine output mechanically blocked.
Faulty ejection of a cassette. Magazine
output blocked.
Transfer of a cassette from the chute
to the cassette carrier failed. Horizontal
motor either incorrectly positioned or
mechanically blocked.
Cassette is stuck in the feeding chute.
Horizontal drive is mechanically blocked.
Vertical drive is mechanically blocked.
Rotational motion is mechanically blocked.
Leica IP C
LED Meaning
– Flash bulb has reached its maximum life.
– Prompt requesting maintenance.
– Prompt to clean the print head.
Ink cartridge has been changed; instrument waiting for
confirmation via ERROR, CLEAN, or LOADED button.
Source of error
Troubleshooting
Troubleshooting solution
Remove the cause of the blockage.
Remove cassette.
Remove cassette.
Remove cassette.
Close the swivelling flap of the flash
module (→ "Fig. 51-1").
Remove cassette.
If error persists, call Leica Technical
Service.
Remove cassette.
If error persists, call Leica Technical
Service.
Remove cassette.
If error persists, call Leica Technical
Service.
7
75