Leica IP C Instructions For Use Manual page 52

5
Operation
ERROR (→ "Fig. 42-8")
Acknowledging an error code being displayed.
LED flashing:
• An error has occurred. The corresponding error message is being displayed.
• If ERROR is pressed after having eliminated the source of an error and after all obstacles in the
processing areas have been removed, the printer resumes normal operation and the error indication
disappears.
• If several errors occur simultaneously, the highest priority error code is displayed first. After that
error has been acknowledged by pressing ERROR, the second highest priority error code is displayed
and so on.
CLEAN (→ "Fig. 42-4")
Cleaning the print head and carrying out a print test
Pressing CLEAN briefly
While a print job is in progress:
• The print job is interrupted.
• A print head clean is carried out and subsequently the print job is resumed.
If no print job is in progress:
• The print head is cleaned immediately after
Note
Pressing the CLEAN button briefly and then releasing it starts a print head clean (indicated by
being displayed). The total duration of the cleaning procedure can be extended to 10 seconds, if
CLEAN is pressed once more as soon as
cleaning (max. duration = 10 sec).
Pressing CLEAN for a longer period of time (minimum 3 seconds)
While a print job is in progress:
52
00 will appear on the display for about 2 s.
has been displayed.
00
is displayed. Hold CLEAN for as long you wish to continue
00
00
Version 2.0, Revision I