Table of Contents
Advertisement
For transport or when the printer is to be disconnected from the power for long periods (from more than
24 h up to six months), a transport cartridge has to be inserted. To do so, proceed as follows:
1.
(→ p. 67 – 6.3.1 Removing the used ink cartridge):
Note
The ink cartridge cannot be used in another printer, because the ink level information is stored in the
printer itself.
2. Take the (new) transport cartridge
3. Remove the protective foil and insert the
slot
(→ "Fig.
4. Loosen the red protective cap
5. Push in the transport cartridge all the way and check that the red retaining bracket
(→ "Fig. 57-1")
6. Unscrew the red protective cap
in the cartridge
7. Mark one of the two boxes on the front of the cartridge to ensure that the transport cartridge is
used only twice.
8. Close the
2
4
Fig. 58
9. The INK EMPTY LED goes out, and
10. Press CLEAN to clean the print head (duration: approx. 3.5 min) -
display will go out when the cleaning process is complete.
Leica IP C
58").
(→ "Fig. 58-2")
is positioned correctly.
(→ "Fig. 58-2")
(→ "Fig.
58-3").
cover plate
on the left side of the printer.
3
Cleaning and Maintenance
Follow steps 1 to 5.
(→ "Fig. 58-1")
out of the delivery carton.
cartridge
until it is about half way into the cartridge
by one turn.
and place it in the recess provided for the cap
1
88
appears in the display.
appears in the display. The
00
6
69
Hide quick links:
Advertisement
Table of Contents
