Table of Contents
Advertisement
• The print job is interrupted. Printer switches to offline mode.
2 s.
• A print head clean is performed and subsequently a test print is carried out on the cassette currently
being processed. The printer then remains in offline mode to enable the user to verify the print quality
before resuming the current print job.
• If necessary, an additional clean can be performed.
• To resume printing, press ONLINE to return to online mode.
• The print job is resumed where previously left off.
If no print job is in progress:
• The printer switches to offline mode.
• All steps are performed as described above.
Note
When operating continuously, the printer pauses regularly for intermediate print head cleans.
Printing is interrupted for approximately 10 seconds, after which time the instrument automatically
resumes operation.
TRAY LOAD
(→ "Fig. 42-9")
Note
If your printer is not equipped with an automated unload station, no function is assigned to this
button!
Fig. 43
Function:
• The imprinted cassettes are pushed out of the printer and onto the uppermost tray.
• At the right end of the tray there is a sensor
The tray stack is then moved upwards by one tray.
Leica IP C
1
(→ "Fig.
44-1"), which triggers a signal when covered.
Operation
00
will appear in the display for about
5
53
Hide quick links:
Advertisement
Table of Contents
