Table of Contents
Advertisement
5
Operation
3. First, the page settings must be selected: Click on
dialog box
4. In
Margins
(→ "Fig.
46-5").
5. In Orientation, select
6. Once the printer has been set up as described above, a cassette format will automatically be
shown in the
two cassette formats
7. In the
Source
cassettes to be imprinted.
8. Deactivate
5
Fig. 46
Warning
The cassette type (angle 35 ° or 45 °) selected in
must match. Otherwise, the print head can be damaged.
Selectable options in the
When clicking on the
6 magazines opens up.
•
(→ "Fig. 47-1")
Manual feed
(→ "Fig. 3-6")
and imprinted. The printer will not start printing until the sensor
(→ p. 55 – 5.2 Display
• Further options are magazines 1 through 6. If a particular magazine has been selected as supply
source, printing will stop once that magazine is empty.
58
(→ "Fig.
46").
(→ "Fig.
46-1"), set all margins to 0; the print range will change as shown
(→ "Fig.
Portrait
(→ "Fig. 46-3")
Size
"cassette 35
(→ "Fig. 46-4")
input field you can select the magazine(s) which will supply the
Print Page Numbers
(→ "Fig.
1
2
6
Paper
>
Source
input field, an alphabetical list of all cassette supply options from all
Source
means that individual cassettes will be placed onto the chute
indications).
File
>
Page Setup
46-2").
input field in the
Paper
°" and
"cassette 45
°".
46-6").
3
4
PAPER
>
SIZE
dialog box
to open the
dialog box. You can choose between
and the cassette type actually used
(→ "Fig. 3-7")
Version 2.0, Revision I
Page Setup
reacts
Hide quick links:
Advertisement
Table of Contents
