Table of Contents
Advertisement
*Recommended for printing barcodes.
Warning
Cassettes of other manufacturers must be tested before use. The test must include the following
steps:
• Mechanical compatibility with the instrument. Imprint quality.
• Resistance of the ink against the reagents with which the imprinted cassettes come into contact
in the subsequent processes
Important!
Leica Biosystems assumes no responsibility whatsoever for any damages suffered as a consequence
of imprints of poor quality or imprints made with non-reagent-resistant ink.
3.3.2 Print specifications
Printing area
The printing area
Format
Cassette 35 °
Cassette 45 °
Fig. 8
Cassette type
• There are two different cassette types, which have a different angle, and therefore a different
printable area.
• The angle
(→ "Fig.
• This must be taken into account in the settings for the printer driver
settings).
Leica IP C
Instrument Components and Specifications
(→ p. 24 – Resistance against
(→ "Fig. 8-1")
parameters listed in the table below are defined in the printer driver.
Width
Dots
mm
400
28.2
400
28.2
1
9"), measured from the bottom, can be 35 °
reagents).
Height
Dots
mm
114
8.0
100
7.1
(→ "Fig. 9-1")
or 45 °
(→ "Fig.
(→ p. 57 – 5.4 Printer driver
3
9-2").
21
Hide quick links:
Advertisement
Table of Contents
