3. Used or new
transport
Caution
NEVER press CLEAN while an ink cartridge is in the instrument! The entire contents of the ink
cartridge will spill into the printer.
» Press the key CLEAN; the current ink level is stored.
Note
The fill level of the
The cartridge can be used twice. The cycle time when inserting a
and is thus considerably longer than that of an ink cartridge.
• After one of the three buttons has been pressed, the ink exchange software routine starts; air is
evacuated from the hoses and the system is refilled with liquid.
When the procedure has been completed,
Running a test print
L Run a test print to verify whether the print head works correctly.
1. For that purpose, fill some cassettes into a magazine and insert the magazine into magazine
position 1.
2. Press and hold the CLEAN button until "00" is displayed, then release the button. A cassette is
imprinted with a stored test image.
If the print result is not satisfactory, this step can be repeated several times.
Leica IP C
cartridge:
transport cartridge
is not monitored. Each use should be noted on the cartridge.
transport cartridge
disappears from the display.
88
Instrument Setup
is 3.5 minutes
4
47