Fig. 10
1. Unscrew the 8 screws
2. Remove the accessory box
directly under the lid.
3. Unscrew the 8 screws
1
Fig. 11
4. Remove the interior carton around the instrument.
5. Carefully remove the wooden box from the baseplate.
6. The printer is secured to the wooden floor of the box with 4 plates
two screws
Leica IP C
(→ "Fig. 11-2")
(→ "Fig. 12-1")
(→ "Fig. 11-3")
2
3
(→ "Fig. 13-1")
on the base of the instrument. Remove the
on the sides of the wooden box and loosen the cover.
(includes accessories and packaging material)
at the bottom of the wooden box on the exterior.
Fig. 12
Instrument Setup
1
(→ "Fig.
13-2"). Loosen the
plates
from the bottom.
4
27