Fig. 17
Warning
To insert/remove, hold the flash bulb as shown in
(→ "Fig. 19").
Fig. 18
4. Carefully pull out the old flash bulb
flash bulb cannot be pulled out easily, gently rock it back and forth to get it unseated from the
socket.
5. Make sure the contact spring
of the bulb (See also
1
Fig. 20
Leica IP C
1
3
(→ "Fig. 20-1")
(→ "Fig. 20-2")
(→ "Fig. 21")
and
2
2
(→ "Fig. 18")
(left). Do not touch it as shown in
Fig. 19
straight to the right, do not twist it. If the
is removed from the priming wire
(→ "Fig.
22-1")).
Instrument Setup
(→ "Fig. 21-4")
4
33