Section 5: Programmer Keyboard Commands; Programmer Keyboard Commands; Module Identification Displays - Honeywell AlarmNet GSMHS Installation And Setup Manual

                                                

Programmer Keyboard Commands

Programmer keyboard commands can be used to quickly view your connectivity settings and
options. Most commands require you to press the [shift] key and then the designated
command key. (See the keys designated in red on the 7720P Programming Tool.)
[A]

Module Identification Displays

[B]
[C]
Programmer Keyboard Commands
GSMHS
x.x.xx mm/dd/yy
MAC xxxxxxxxxxxx
MAC CRC yyyy
SCID xxxxx xxxxx
xxxxx xxxxx
IMEI xxxxxxxx
xxxxxx x
Mon 01 Jan 2001
05:48:39 am
Software Revision
"x.x.xx" indicates the installed software Revision.
Mm/dd/yy indicates month, day and year of the
revision.
MAC Address
"xxxxxxxxxxxx" indicates the GSMHS's unique
identification number.
"yyyy" indicates the MAC CRC number. This number
is also found on the label on the module, as well as the
label on the box.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
SCID Display
Displays the identification number assigned to the SIM
card (SCID) in this device.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
IMEI Display
Displays the identification number assigned to the
GSM module in this device.
Press the [Space] key to get the MAC Address.
Press the backspace [BS] key to go to the previous field.
Time
Retrieves the current date and time from the AlarmNet
network in Greenwich Mean Time (GMT). This display
confirms that the module is in sync with network.
S E C T I O N 5
5-1