Description 19" Slide-In Module 4 To 20 Ma; Grounding Concept 19" Slide-In Module 4 To 20 Ma - Siemens SIPART PS2 Operating Instructions Manual

Electropneumatic positioner
Hide thumbs Also See for SIPART PS2:
Table of Contents

Advertisement

Positioner with remote control electronics
F.2 19" slide-in module
Figure F-1
Figure F-2
F.2.2

Description 19" slide-in module 4 to 20 mA

F.2.2.1

Grounding concept 19" slide-in module 4 to 20 mA

NOTICE
Interference
To dissipate interference pulses the positioner components must be connected to an
equipotential bonding cable (ground potential) using a low resistance.
● Connect the positioner 6DR5910 according to the grounding concept described below.
294
19" slide-in module 4 to 20 mA
Sub-D male connector 9-pin for cable to the
control system
Channel 2
Device view 19" slide-in module, 4 to 20 mA, rear view
19" slide-in module 4 to 20 mA
Channel 1
Channel 3
Device view 19" slide-in module, 4 to 20 mA, front view
Sub-D 15-pin socket connector for cable to
the valve
Channel 3
Channel 1
Display
Channel 2
Input keys
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC

Advertisement

Table of Contents
loading

Table of Contents