Connection diagram for mechanical limit switch modules 6DR4004-6K and -8K
①
Non-hazardous area
②
Hazardous area
③
Mechanical limit switch module
④
Fault message
Figure 5-10
Mechanical limit switch module
Procedure
1. Loosen the screw
2. Pull the transparent cover
3. Tighten every cable in the corresponding terminal.
4. Slide the transparent cover
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
⑤
⑥
⑦
①
on the transparent cover
②
up to the front end stop.
②
up to the end stop of the basic electronics.
Limit
Switching amplifier
Switching output
②
.
Connection
5.2 Electrical wiring
83