Diagnostics Parameter '17.Stic' Stiction (Slipstick); Diagnostics Parameter '18.Zero' Lower Endstop; Diagnostics Parameter '19.Open' Displacement Of Upper End Stop - Siemens 6DR50 Series Operating Instructions Manual

Alarm, error, and system messages
10.2 Diagnostics
Purpose:
Factory setting:
10.2.3.15

Diagnostics parameter '17.STIC' Stiction (slipstick)

Requirement:
Display range:
Purpose:
Factory setting:
10.2.3.16

Diagnostics parameter '18.ZERO' Lower endstop

Display range:
Purpose:
Factory setting:
See also
'39.YCLS' Tight closing with manipulated variable (Page 166)
10.2.3.17

Diagnostics parameter '19.OPEN' Displacement of upper end stop

Display range:
Purpose:
Factory setting:
214
This diagnostics parameter shows the current leakage indicator. If
the leakage detection is deactivated in the configuration menu,
"OFF" is displayed.
OFF
Monitoring of stiction is activated, "Monitoring the stiction (slipstick)
"d._STIC" (Page 185)".
• OFF
• 0.0 ... 100.0
This diagnostics parameter shows the filtered value of the slip
jumps in percent resulting from the stiction.
OFF
• OFF
• 0.0 ... 100.0
Indication of how many percent the lower endstop has changed
compared to its value during initialization. The activation of the
"down tight closing function" is a condition to determine this. If the
underlying function is deactivated in the configuration menu, "OFF"
is displayed.
OFF
• OFF
• 0.0 ... 100.0
Display of the current displacement of the upper hard end stop
with respect to its initialization value. The activation of the "up tight
closing function" is a condition to determine this. If the underlying
function is deactivated in the configuration menu, "OFF" is dis-
played.
OFF
SIPART PS2 with and without HART
Operating Instructions, 09/2014, A5E00074631-12