Diagnostic Value '57.Lkpul - Length Of The Leakage Compensation Pulse; Diagnostic Value '58.Lkper - Period Of The Leakage Compensation Pulse; Diagnostic Value '59.Ma - Setpoint Current - Siemens SIPART PS2 Operating Instructions Manual

Travel range
Travel range section [%]
Division of travel ranges
10.2.4.32

Diagnostic value '57.LKPUL - Length of the leakage compensation pulse'

Display range:
Purpose:
Factory setting:
10.2.4.33

Diagnostic value '58.LKPER - Period of the leakage compensation pulse'

Display range:
Purpose:
Factory setting:
10.2.4.34

Diagnostic value '59.mA - Setpoint current'

Here you can display the current setpoint in mA.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
WT00 WT05 WT10
- ≥ 5 ≥ 10
< 5 < 10 < 30
You can simultaneously set the eight operating hours counters to
zero.
TIP: Since the travel ranges are provided at the end of the diagnos‐
tics parameters, press the
button. This will help you to access the desired diagnostics pa‐
rameters faster.
-256 ... 0 ... 254
This value in milliseconds indicates the length of a compensation
pulse when Monitoring/compensation of pneumatic leakage 'C.\
\LEAK' (Page 174) is active. The sign indicates the control direction
of the pulse.
0
0.00 ... 600.00
This value in seconds indicates the period of the leakage compen‐
sation pulses when Monitoring/compensation of pneumatic leakage
'C.\\LEAK' (Page 174) is active.
0.00
Alarm, error, and system messages
WT30 WT50 WT70
≥ 30 ≥ 50 ≥ 70
< 50 < 70 < 90
button several times along with the
10.2 Diagnostics
WT90 WT95
≥ 90 ≥ 95
< 95 -
213