Protocol - Siemens SI120 Configuration Manual

13.3

Protocol

Only for ARC 1 The following protocols are available:
Telim
Telenot
Ademco Contact ID
Ademco Express
SIA level 1
SIA level 2
Vocal
Cesa 200 Bds
Seriee
Stratel
Robofon
Surtec DTMF
Scantronic
4 plus 2
WITLINK V23
Cesa extended
Customer number partition
1
Customer number partition
2
Siemens Building Technologies
Fire Safety & Security Products
NOTE
The protocols depending on the unit version.
6 digits
6 digits
4 digits
6 digits
6 digits
No digits
5 digits
4 digits
8 digits
6 digits
5 digits
6 digits
4 digits
8 digits
8 digits
All events from partition 1 and virtual partition 3 and the system alarms (battery fault, automatic test call,
...) can be transmitted with this number.
All events from partition 2 can be transmitted with this number.
Open protocol; 8 values
Open protocol; 8-15 values
Closed protocol.
NOTE
If a transmssion line of a syntchetic input (e.g. BA Partition
1) is enabled, all physical BA inputs linked to partition 1 are
automatically internally set to tranmission, even if the
tranmission of according physical inputs are disabled.
Closed protocol
Closed protocol
Message 1-6
Open protocol; 0 - 99 values
Low battery, Full set, Test, code alarm
Open protocol; 0 - 99 values
Open protocol; 16 values
SI 120/220
ARC
73
07.2009