Rf Controls; Partition; Partition Rights - Siemens SI120 Configuration Manual

5

RF Controls

5.1

Partition

5.2

Partition Rights

O: Forced Set
U: Unset
P: Part Set
F: Full Set
1: Button 1
2: Button 2
Siemens Building Technologies
Fire Safety & Security Products
4. Carry out the required function by pressing a button sequence:
Button
901#
902#
910#
911#
912#
920#
921#
922#
..
960#
961#
962#
The buttons 9 and # are used for the following function:
Button
9
#
Assign the "partition rights" for each partition.
Select the partition for the assigned "partition rights".
The user can force the partition to set with inputs (zones) which are not in normal state. If you want to use
this function, you have to define the inputs as bypass able.
The user can switch the partition to unset state.
The user can switch the partition to part set state.
The user can switch the partition to full set state
This right is assigned to the output logical function "Radio Remote Control Button 1"
This right is assigned to the output logical function "Radio Remote Control Button 2"
Sequence
Toggle remote control output 1
Toggle remote control output 2
Unset partition 1
Full set partition 1
Part set partition 1
Unset partition 2
Full set partition 2
Part set partition 2
..
Unset partition 6
Full set partition 6
Part set partition 6
Function
Deletes the entry
The operation is transmitted to the control unit and one
beep tone is heard.
If the operation can not be transmitted to the control unit,
two beep sounds are heard.
RF Controls
17
07.2009