Configuration Of Smsc And Apn; Configuration Of Data Transmission Protocol - Siemens SITRANS F M MAG 8000 Series Operating Instructions Manual

Wireless communication modules, 3g/umts add-on module
Hide thumbs Also See for SITRANS F M MAG 8000 Series:
Table of Contents

Advertisement

Code
P54
P55
P56
P58
P59
P60
P61
P62
P84
Phone numbers used in the configuration of the Wireless Communication Module must be conformed
1)
to the international telephone number format (+ with country code).
Parameters/features are only supported by GSM/GPRS modules manufactured after week 3 of 2017.
2)
Parameters/features are not supported by GSM/GPRS modules.
3)
P61 is not required in the 3G/UMTS module and is replaced by P62.
4)
6.3.2

Configuration of SMSC and APN

SMSC must be configured as the first parameter, otherwise the Wireless Communication
Module will not be able to send the response message.
Consult your mobile network operator for information about the SMSC and APN.
Example for German Vodafone SIM card:
Configuration;P3=+491722270333;P10=web.vodafone.de;
6.3.3

Configuration of data transmission protocol

The data transmission protocol is controlled by the parameter P52. Nine modes are supported
by the 3G/UMTS module.
● 0 = email and SMS
The measurement data will be sent by email if a data connection is available. If no data
connection is available or the mail server is down, 12 values of Totalizer 1 will be extracted
from the measurement data and sent by SMS.
● 1 = SMS only
A SMS with 12 values of Totalizer 1 will be extracted from the measurement data and sent
by SMS to the receiver programmed in parameter P9.
SITRANS FM MAG 8000 3G/UMTS add-on module
Operating Instructions, 03/2020, A5E03644134-AC
Command description
Control of 4/20 mA input detection
Wireless Communication Module sample inter‐
val from MAG 8000
Data Transmission interval
Wireless Communication Module alarm configu‐
ration
Main Control Unit firmware version
MAG 8000 FW version
Synchronization time of data sampling from
4)
MAG8000
Synchronization time of data transmission
FTP(S) working directory
6.3 Configuration
Values
3G/UMTS
module
0 = Off
YES
1 = On
YES
1 to 255 min
YES
1 to 255 h
1 to 744 h
YES
1 to 31 d
YES
1 M
YES
See Alarms
YES
read only
YES
read only
YES
00:00 - 23:59
YES
Empty: no sync.
YES
00:00 - 23:59
YES
Empty: no sync.
YES
text string
YES
Commissioning
GSM/
GPRS
module
YES
2)
YES
2)
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
2)
YES
2)
NO
3)
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents