Miscellaneous; On Line Mode; Date/Time Change; Keypads Messages - Siemens SI120 Configuration Manual

Miscellaneous

3 Miscellaneous
3.1

On Line Mode

Up/Download Transmis- Requirement for a remote connection:
sion
must match with the Sylcom customer file.
Download During a download the parameters which were programmed in Sylcom are loaded to the central control unit
(PC --> Control panel).
Upload During an upload the Control panel parameters are transferred to a computer running on Sylcom (Control
panel --> PC).
Read Log B 500 events will be read out of the panel.
Characters Only country specific special characters can be entered in Sylcom (inputs, outputs name...). All other charac-
ters are not allowed.
3.2

Date/Time Change

[TM 71] Change date This menu function is used to change the date and time. The clock is immediately updated after confirmation.
and time The hours must be entered using the 24 hour system. The change of date and time is written to the log.
3.3

Keypads messages

[TM5171] Partition Assign a keypad message to a chosen partition for a customer information
Free text 1/2 Two lines of free text each consisting of 16 characters can be entered here.
The letters, numbers and some special characters are present as a multiple assignment on the remote key-
pad.
Switch on display The user-defined display can be "activated" and "desactivate" here.
3.4

Auto Test 1/2 in

Auto Test 1 / 2 in This initializes the start time of the possible two tests.
12
Siemens Building Technologies
Fire Safety & Security Products
The control panel must be connected to the telephone network.
For a successful transmission, the "Sintony Tel" and the "Site Number" parameters in the System menu
NOTE
After the user has logged out, there is the possibility to delete this message.
NOTE
Set the "Test periodicity" in the menu ARC. Default setting is 24 h.
07.2009