Inputs; Hardware Input; Input Name; Logical Input Type - Siemens SI120 Configuration Manual

Inputs

6 Inputs
6.1

Hardware Input

6.2

Input Name

6.3

Logical Input Type

Input type
1 Unused
2 Keyswitch Zone latching Full Set
3 Keysw. Full set blockschloss
4 Keyswitch Zone latching Part Set
5 Keyswitch Zone Pulse Full Set
6 Keyswitch Zone Pulse Part Set
18
Siemens Building Technologies
Fire Safety & Security Products
In online modus there is info {yellow field} about the particular physical input status.
In case of maintenance {green field}, there is a possibility to change the logical
state.
Physical State Short circuit
Opened circuit
Alarm
- - - - - - - - -
Logical State Soak Test
In Alarm
In Trouble
Bypassed
- - - - - - - - -
An example for a hardware Input: I1/MainPCB (Input 1 on Main PCB Board)
Any name consisting of a maximum of 16 characters can be used as the input des-
ignation. The letters, number and some special characters are available on the
keyboard of the LCD keypads as multiple assignments.
[TM 511] Not all input types can be assigned to all partitions. The possible input
types depend on the partition type.
Partitions
Main Sub Virtual
Y Y
Y* Y*
Y* Y*
Y Y
Y* Y*
The Input triggered an alarm
According to menu Engineer Management "soak test"
According to menu Inputs "bypassable"
Room By- Delay
passabl
e Seconds
N Y N
N N N
N N N
N Y N
N N N
Chime
Minutes
N N N
N N N
N N N
N N N
N N N
07.2009