Pin User; User Name; Type Of User; Create User Online - Siemens SI120 Configuration Manual

4

PIN User

4.1

User Name

4.2

Type of User

[TM 25] Print User Pin
4.2.1

Create User online

Siemens Building Technologies
Fire Safety & Security Products
NOTE
Configuration of user at Sylcom is only availabe in online mode!
The current user name can be replaced by any freely definable name (maximum
16 characters). Each must have a unique name.
6 or 4 digits PINs can be defined with or without blocking of the keypad after 3
wrong attemps. This option is selectable by TM 5172. By creating a new user, a
code is always given by control panel: you can change it or not.
This menu function enables all the parameters of user PIN's to be printed out via the serial interface. A
printer can be directly controlled or instead a terminal program.
The printout can be stopped by typing "X". For printing, the PC/printer-cable SAQ 11 must be con-
nected to the control panel main board on the connector J7. A serial printer or a PC terminal program
can be used for printout.
There is no possibility to change the PIN code of an existing user by Sylcom;
WARNING
therefore you have to change the PIN Code at the keypad.
[TM 22] Creating a new user "new pin" in on line mode will always set the next free
parameter from "unused" user to "End user".
Choose between a temporary and definitive user code.
PIN User
13
07.2009