Ba Loop Follower Full Or Part Set - Siemens SI120 Configuration Manual

Inputs

6.3.33 BA Loop Follower Full or Part Set

Burglar Alarm Follower Brief description: BA external entry follower; internal entry follower
Full / Part Set
Delayed exit triggering on Part and Full set in the assigned partition and a possible delayed entry triggering
to another BA Input in the same partition. If no other BA Input is triggered, an immediate BA will take place
on the Loop Follower Input.
DE, UK If on setting the input remains triggered up the end of the delay time, the partition is again unset.
All other country ver- If on setting the input remains triggered up the end of the delay time, the partition remains full set and an
sions alarm is triggered.
Partition mode:
Unset
8
8
X
Partition parameters:
X =
1 =
2 =
3 =
4 =
5 =
8 =
34
Siemens Building Technologies
Fire Safety & Security Products
NOTE
The parameter "delay" applies only on the exit delay time.
Part set
Full set
Effects on the following outputs when the below partition parameters are preset:
4 External bell
1/4
4 Internal bell
2/4
4 Strobe light
1/4
8 Cannot full set
Cannot part set
4 4 Alarm in memory
X Block lock not released
Buzzer
4/5 4/5
4 Burglar alarm system transmission line
3/4
4 Burglar alarm partition transmission line
3/4
Triggering regardless of the partition mode.
Triggering only if the external bell "When Part Set" in the partition parameter is chosen.
Triggering only if the internal bell "When Full Set" in the partition parameter is chosen.
Triggering only if "transmission" parameter is chosen.
Triggering delayed if a delayed input has already been triggered.
Triggering only if "Buzzer On" in the keypad parameter is chosen.
Triggering only if no exit delay is programmed.
07.2009