Copyright; Specified Application - KEB COMBIVERT G6 series Programming Manual

Selection of our units in view of their suitability for the intended use must be done generally
by the user.
Tests can only be done within the application by the machine manufacturer. They must
be repeated, even if only parts of hardware, software or the unit adjustment are mod-
ified.
Danger
The suspension of liability is especially valid also for operation interruption loss, loss of profit,
data loss or other damages. The disclaimer will void the warranty. This is also valid, if we
referred first to the possibility of such damages.
If single regulations should be or become void, invalid or impracticable, the effectivity of all
other regulations or agreements is not affected.
Through multitude applications not each possible case of installation, operation or mainte-
nance can be considered. If you require further information or if special problems arise which
are not treated in detail in the documentation, you can request the required information from
the local agency of the company Karl E.Brinkmann GmbH.
1.4

Copyright

The customer may use the instruction manual as well as further documents or parts from it for
internal purposes. Copyrights are with KEB and remain valid in its entirety.
KEB , COMBIVERT
®
E. Brinkmann GmbH.
Other wordmarks or/and logos are trademarks (™) or registered trademarks (®) of their re-
spective owners and are listed in the footnote on the first occurrence.
When creating our documents we pay attention with the utmost care to the rights of third
parties. Should we have not marked a trademark or breach a copyright, please inform us in
order to have the possibility of remedy.
1.5 Specified application
The COMBIVERT G6 serves exclusively for the control and regulation of three-phase motors.
The operation of other electric consumers is prohibited and can lead to the destruction of the
unit. Frequency inverter are components which are intended for the installation in electric
systems or machines.
Die bei KEB eingesetzten Halbleiter und Bauteile sind für den Einsatz in industriellen Produk-
ten entwickelt und ausgelegt. If the KEB COMBIVERT F5 is used in machines, which work
under exceptional conditions or if essential functions, life-supporting measures or an extraor-
dinary safety step must be fulfilled, the necessary reliability and security must be ensured by
the machine builder.
by tamper from unauthorized personnel
Unauthorised opening and tampering may lead to death, bodily injury, prop-
erty damage and malfunctions. Modification or repair is permitted only by
KEB authorized personnel. Infringement will annul the liability for resulting
consequences.
, COMBICONTROL
®
and COMBIVIS are registered trademarks of Karl
® ®
Preface
5