Preface; Information On Special Measures; Documentation; Validity And Liability - KEB COMBIVERT G6 series Programming Manual

Preface

1. Preface
The described hardware and software are developments of the Karl E. Brinkmann GmbH.
The enclosed documents correspond to conditions valid at printing. Misprint, mistakes and
technical changes reserved.
1.1

Information on special measures

The used pictograms have following significance:
Danger
Warning
Caution
Attention
Info
For a special case the instructions can be supplemented by additional pictograms and text.
1.2

Documentation

Before working with the unit the user must become familiar with it. This includes especially
the knowledge and observance of the safety and operating instructions.
Attention
Non-observance of the safety and operating instructions leads to the loss of any liability
claims. The warnings and safety instructions in this manual work only supplementary. This
list is not exhaustive.
1.3

Validity and liability

The use of our units in the target products is beyond of our control and therefore exclu-
sively the responsibility of the machine manufacturer, system integrator or customer.
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibil-
ity. This also applies to any violation of industrial property rights of a third-party.
4
Is used, when death or serious bodily injury may be the consequence
of non-observance of the measure.
Is used, when bodily injury and/or substantial property damage may
be the consequence of non-observance of the measure.
Is used, when property damage may be the consequence of non-ob-
servance of the measure.
Is used, when noise sensitive or unrequested operation may be the
consequence of non-observance of the measure.
Is used, when a better or simpler result can be the consequence of the
measure.
Observe safety and operating instructions
Precondition for all further steps is the knowledge and observance of the
safety and operating instructions. This is provided accompanied by the de-
vice or by the download site of www.keb.de.