6.3.2 Number of Occupied I/O Points for the Unit
For the F mode, the number of I/O points allocated to the remote I/O part is occupied.
Mode
F mode
KEY POINTS
Set the numbers of input words and output words according to the
•
configuration of connected remote I/O. When the allocation of occupied I/O
points is not enough, it is necessary to change the allocation of I/O map
along with other units.
6.3.3 Confirmation of Slot Numbers
Slot numbers are decided by registering units in the I/O map. Slot numbers are used when
reading or writing the values of unit memories by user programs. They are also used when
performing the data monitoring on FPWIN GR7.
Slot number
Slot numbers are decided by each installation position of units. They are counted from the unit
closest to the CPU unit.
C
1
2
3
P
●●●●●●
U
Display on the I/O map of FPWIN GR7
Slot numbers can be confirmed in the "I/O map" dialog box of FPWIN GR7.
Using by user programs
The user program below is that for specifying the slot number.
R100
No. of points
Input: 0 to 256 words / Output: 0 to 256 words
16
UNITSEL
PMGET
U1
U0
S1
S2
U2
DT0
S
D
6.3 Configuration
6-5