W2 Link Unit Setting Procedure - Panasonic FP7 User Manual

MEWNET-W2

5.3.4 W2 Link Unit Setting Procedure

Link relays and link registers are set in the "W2 Link Unit Settings" dialog box of FPWIN GR7.
The following procedure describes the case that "W2 link unit" has been already registered in
the "I/O map" dialog box.
PROCEDURE
1. Select "Options" > "FP7 Configuration" > "I/O map" in the menu bar.
The "I/O map" dialog box is displayed.
2. Select the slot where W2 link unit has been selected, and press the
"Advanced" button.
The "W2 Link Unit Settings" dialog box is displayed.
3. Check "Use PLC link" and set the unit number.
When the PLC link is not used, uncheck the checkbox.
4. For the PLC link, set each item relating to link relays and link registers.
5. Press the [OK] button.
The window returns to the "I/O map" dialog box.
6. Press the [OK] button.
It returns to the edit window of FPWIN GR7. These settings will be downloaded to
the CPU unit together with programs and other configuration information, and will
be effective in RUN mode.
5-6