Registration By Configuration - Panasonic FP7 User Manual

MEWNET-F

6.4.2 Registration by Configuration

This section describes the procedure for setting the I/O allocation of MEWNET-F slave units in
the "F Link Unit Settings" dialog box of FPWIN GR7. The following are operations in the "F
link unit setting" dialog box.
PROCEDURE
1. Double-click the slot in which "F link unit" has been registered in the "I/O
map" dialog box.
The "F Link Unit Settings" dialog box is displayed.
2. Double-click the position of a slave unit to be registered.
The "I/O Occupation Settings" dialog box is displayed.
3. Select "I/O Occupation Settings" according to the used slave unit, and
press the [OK] button.
The symbols indicating the number of I/O points are registered and the number of
slots is updated. In the base column, the word number is displayed.
4. Repeat the above steps according to your system configuration.
5. Press the [OK] button.
The window returns to the "I/O map" dialog box.
6-12