Setting Communication Conditions
4.2.5 Target IP address for unit number Setting
"Target IP address for unit number Setting" is available, in case of the following condtions.
Protocol Mode:TCP or UDP (UNICAST)
Action Mode:Client Mode
Communication Mode:MEWTOCOL
PROCEDURE
1. Press [Option].
"Option" dialigbox will open.
2. Check the checkbox "Destination unit number and IP address is specified".
3. Double-click the line of the desired unit number.
"Target IP address for unit number setting " dialigbox will open.
4. Enter IP Address for unit number
5. Press [OK].
4-10