MEWNET-F
6.1 Overview
The following are main steps to use the FP7 MW Unit in F mode.
Item
Set the switches of the
①
unit.
Set the switches of
②
slave units.
Registration in I/O map
③
of the unit
Unit Configuration
④
Allocation of remote
I/O map
Download the settings
⑤
to the unit and confirm
the operation state.
(Note 1): I/O can be allocated by mount allocation.
6-2
Used tool
Outline of operation
Select "F mode" by the mode selector switches. Sets the
-
operation mode in an abnormal state.
Set the unit numbers of connected slave units by the dip
-
switches of each slave unit.
Register the unit configuration of the FP7 system on the "I/O
map" dialog box. (Note 1)
FPWIN
For the F mode, set the number of I/O words allocated to slave
GR7
units and base numbers of I/O numbers.
Confirm slot numbers specified for each instruction.
Set the slave unit connection wait time and I/O refresh method.
FPWIN
GR7
Allocate I/O for slave units. (Note 1)
Download "I/O map" and "unit configuration" information to the
FP7 CPU Unit.
Switch the mode to RUN mode.
FPWIN
GR7
Confirm the state if the process is normally performed. The
communication state and error information can be confirmed by
system relays or system data registers. Also, detailed
information can be read by PMGET instruction.