Names And Functions Of Parts - Panasonic FP7 User Manual

Names and Functions of Parts

2.1 Names and Functions of Parts
①
②
③
④
⑤
⑥
 Names and Functions of Parts
Number Name
①
Operation monitor LEDs
②
Unit number selector
Slave unit number
③
display selector
④
Mode selector switches
⑤
Terminator setting switch
Connection terminal for
⑥
transmission line
⑦
Side switch
2-2
Functions
Indicates the operation state of the unit such as the communication
state, error state and selected communication mode.
Sets the unit number of the own unit in the network. It is used in the
Wor W2 mode only.
Switches the slave unit number display of the operation monitor LEDs.
It is used in the F mode only.
Sets the operation mode (network type, PLC link mode, non-PLC link
mode and baud rate).
Sets the terminating unit.
For connecting the communication cables.
This switch is used for the system. Use this at the factory default (all
off) as it is.
⑦