Panasonic FP7 User Manual page 131

 W / W2 mode specifications
Item
Communication Functions
Function / PLC link
Number of
Others
units
Used
area
PLC link
Setting method
Capacity
Operation
Used area
state/Error
annunciati
on
Setting method
Data transfer capacity
Computer link capacity
 F mode specifications
Item
No. of control points per CPU
No. of control points per unit
No. of master units per CPU
(Note 1): Up to 4 master units (F mode) can be used in the range of the number of control points of CPU Unit.
PLC link, Data transfer
Remote programming, Computer link, Hierarchy link
Max. 16 units
Max. 32 units
Memory block specification of
Link relay
WL
Memory block specification of
Link register
LD
W link configuration
Link relay Max. 1024 points
Link register Max. 128 words
- System relays
- System data registers
- Detailed information can be
output to WR, LD, DT by
setting.
W link configuration
Max. 55 words (SEND
instruction)
Max. 56 words (RECV
instruction)
Max. 118 bytes
Specifications
Total I/O points: 16064 (excluding 320 points of 10 words occupied
by the SCU and ET-LAN built in the CPU)
Total I/O points: 4096
Max. 4 units (Note 1)
Specifications
W mode
Max. 32 units
WL, WR, LD, DT can be used.
(by setting)
W2 link configuration
Max. 4096 points
Max. 4096 words
- System relays
- System data registers
- Detailed information can be
output to Wl, WR, LD, DT by
setting.
W2 link configuration
Max. 1020 words
Max. 2048 bytes
10.1 Specifications
W2 mode
10-3