Parameter Setting - Mitsubishi Electric MELSEC-L SERIES Basic User Manual

13.3

Parameter Setting

Set the following parameters to perform communications using a random access buffer.
• Basic setting (
• Ethernet operation setting (
• Open setting (
Item
Fixed Buffer Select the communication method for communications using a fixed buffer. Select
Communication "Procedure Exist" for communications using a random access buffer.
CHAPTER 13 COMMUNICATIONS USING A RANDOM ACCESS BUFFER
Page 66, Section 7.1.2)
Page 67, Section 7.1.3)
Page 69, Section 7.1.4)
Description
13
Setting range
Procedure Exist
157