Mitsubishi Electric MELSEC-L SERIES Basic User Manual page 326

Melsec-l ethernet interface module

Hide thumbs Also See for MELSEC-L SERIES:

Table of Contents

The test results are displayed.

If the test fails, check the following and perform the test again.

• Whether the E71 is properly connected

• Connection to the Ethernet network

• Parameter settings written in the CPU module

• Operating status of the CPU module (whether or not an error has occurred)

• IP addresses set in the programming tool and the PING test target station

• Whether the connected device has been reset after the E71 was replaced

Troubleshooting