Ethernet Diagnostics - Mitsubishi Electric MELSEC-L SERIES Basic User Manual

16.8

Ethernet Diagnostics

Items such as the module status, parameter settings, communication status, and error history of an E71 can be
checked. Perform the diagnostics in the "Ethernet Diagnostics" window of the programming tool.
[Diagnostics]
Item
Target Module Setting (Module No.)
Parameter Status
Error History
Status of Each Connection
Status of Each Protocol
LED Status
Received E-mail Information
Send E-mail Information
button
button
button
Remark
For each window and detailed explanations, refer to the following.
Operating manual for the programming tool used
300
[Ethernet Diagnostics...]
Specify the E71 to be monitored. The number of other network modules is not
included.
Module information (such as the IP address and basic settings) is displayed.
The number of errors and their details (such as the error code and information about
the connection where the error has occurred) is displayed.
The status of each connection (such as error codes and the open setting) is displayed.
Information such as the total number of data sending/receiving times for each protocol
is displayed.
The operation mode and the LED status of the E71 are displayed.
Received mail information and the error log are displayed.
Sent mail information and the error log are displayed.
The "PING Test" window is displayed.
The "Loopback Test" window is displayed.
The COM.ERR. LED is turned off. (
Description
Page 303, Section 16.10)