Parameter Setting - Mitsubishi Electric MELSEC-L SERIES Basic User Manual

12.7.2

Parameter setting

The following is the pairing open setting.
Item
Set "Pairing Open" of the receive connection to "Enable". The next connection is
Pairing Open
automatically set as a send connection.
*1 When "Enable" has been set in "Pairing Open" for a send connection, the following window appears.
When the
connection is automatically set as a send connection. (When "Enable" has already been set in "Pairing Open", the
setting is overwritten.)
Because the fixed buffer of the connection with the connected device (for receiving) and the fixed buffer of the next
connection (for sending) are paired, set connection numbers 1 to 7 and 9 to 15 as receive connections. (Connection
numbers 8 and 16 cannot be set.)
140
Description
*1
button is selected, the applicable connection becomes a receive connection, and the next
Setting range
