Program Example - Mitsubishi Electric MELSEC-L SERIES Basic User Manual

14.3.3

Program example

The following is a program example that allows access only from the IP addresses 192.168.3.1 to 192.168.3.5. (When
the I/O signals of the E71 are X/Y00 to X/Y1F)
(1) Sample program
CHAPTER 14 OTHER FUNCTIONS
Set the IP filter function to "Use".
Set "Allow".
Set the start IP address to "192.168.3.1".
Set the end IP address to "192.168.3.5".
14
179