Chapter 8 Connecting Melsoft Products And A Got; Applications - Mitsubishi Electric MELSEC-L SERIES Basic User Manual

Melsec-l ethernet interface module
Hide thumbs Also See for MELSEC-L SERIES:
Table of Contents

Advertisement

CHAPTER 8
This chapter describes the connection of the E71 with MELSOFT products (such as a programming tool and MX
Component) and the GOT.
8.1

Applications

This section describes applications according to a connection type.
(1) Programming and monitoring over Ethernet
In Ethernet, a programming tool can create programming of a programmable controller and monitor a
programmable controller (MELSOFT connection), and the GOT can monitor and test a programmable controller.
Remote operations making full use of the Ethernet capability, long-distance connectivity and high-speed
communications, are achieved.
(2) Connecting multiple products
Multiple MELSOFT products and GOTs can be connected using MELSOFT application communication ports.
The connection used in the connection with MELSOFT products is only for data communications with the MELSOFT
products and cannot be used for data communications with connected devices other than MELSOFT products.
(a) Connection using the TCP/IP communications
The E71 can connect to up to 17 MELSOFT products using one dedicated system connection and 16 user
connections. GOTs cannot be connected using the TCP/IP communications. (Use the UDP/IP
communications.)
(b) Connection using the UDP/IP communications
The E71 can connect a MELSOFT product and a GOT using one dedicated system connection.
82
CONNECTING MELSOFT PRODUCTS
AND A GOT
Programming tool
GOT
E71

Advertisement

Table of Contents
loading

Table of Contents